High Quality Carbon fibre reinforced Polycarbonat. Contains real fibres, no powder! Compatible with Bambu AMS.

Diameter: 1.75mm
Net weight: 1kg

Drying the filament before printing is highly recommended.

Check out our discord for user impressions: Toro 3D Discord (click me)

Recommended Printing parameters:
Nozzle temperature: 260-300 °C
Bed temperature: 110-120°C
Chamber temperature: 60°C-85°C

Technical Data:

Density: 1.23 g/cm³
Tensile strength: 67 MPa
Tensile modulus: 2.5 GPa
HDT/B: 125°C

Disclaimer: The technical data shown above is
furnished without charge or obligation and accepted at the
recipient’s sole risk. This data should not be used to establish
specifications limits or used alone as the basis of design. The data
provided is not intended to substitute any testing that may be
required to determine fitness for any specific use.