Advantages

A featherweight:

On average divided by 7 compared to a standard battery!

Quick and easy assembly:

Ready to use, just plug it in and use it. No need to refill or recharge it. It can be put in any direction!

An important lifespan:>

It can withstand 5 times more charge / discharge than the best lead-acid batteries on the market!

A quiet winter without maintenance:

The battery can be disconnected using the connector. It takes 10 seconds and without tools. The battery can be left outdoors because it is resistant to temperatures of -30 ° C. In addition, it is not necessary to recharge it during these long periods because it can remain more than two years without being used while conserving its energy.

Optimal security:

The battery, by design, does not catch fire and does not explode in the event of a violent impact or piercing unlike lithium ion batteries which can ignite or lead batteries filled with acid.

Fast recharging:

After a normal start the battery takes less than 60 seconds to recharge.

We recommend using the Solise brand charger: https://frenchmotoshop.com/products/chargeur-batterie-solise

An ecological battery:

It does not contain heavy metals such as lead or mercury which are responsible for a multitude of pathologies. It is therefore easily recyclable.

Characteristics

Motorcycle Battery 12V Lithium Iron Phosphate LiFePO4

This battery specially designed for scooters and motorcycles is based on the latest lithium iron nano-phosphate technology (LiFePO4).
It uses nanotechnology to improve its performance, saving space and weight.
It replaces your lead-acid battery without modification.
It is guaranteed for 1 year

Voltage: 12V
Capacity: 5Ah
Recharging voltage: 13,8V to 14,4V
Dimensions: 110mm (L) x 55mm (w) x 75mm (h)
Weight: 740g (without connectors)
Starting current: 240A for 10s
Continuous discharge current: 140A
Operating temperature: -20 ° C to + 60 ° C
Storage temperature: 0 ° C to + 30 ° C
Fast charge: 20A for 15 minutes
Lifespan: 2000 cycles
IP30 flexible heat-shrinkable plastic casing (not protected against falling water)
Precaution to take :
The battery should not be recharged at a voltage higher than 14,6V. if the voltage is much higher, risk of overheating and fire may occur.
The battery must not come into contact with water.
The battery must not be placed near a flame or a source of heat higher than 60 ° C.
Please note that the maximum capacity equivalent to a lead battery is 12Ah, this battery will not be compatible with your motorcycle if your original lead battery has a capacity greater than 12Ah.
The connection is supplied with the battery. She is made of :
Cord with an Anderson 50A 35mm x 48mm connector compatible with the motorcycle battery connector on one side and two 6mm lugs on the other
2 M6 screws for fixing with washers and nuts
2 heat-shrinkable sleeves for insulation
Cord length: 170mm
Maximum continuous current: 50A
Maximum current for 10 sec: 550A

Ref: BM12005

For which motorcycles?

To find out which battery reference to choose for the model of your motorcycle, Click here